Industrial Tape & Supply Co. - Item # V712, Norseal® V710
Industrial Tape & Supply Company :: For All Your Tape & Packaging Needs.

Products LinesTesaBerry PlasticsSaint-GobainPac StrappingDeWalCantechIntertapeVibacCamie Other Products & Services
Printed Tapes
Custom Converting & Slitting

 
 Search Catalog
      GO   
 All Categories    Norseal® V710
View RFQ's
 Request for Quote  0 items 
All Categories > Saint-Gobain Performance Plastics > Tapes - Pressure Sensitive Adhesive  > Norseal > Norseal® V710 > Item # V712  
Request Information

Item # V712 Norseal® V710
QUOTE



    Print Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

norseal-series-foam-sealant

larger image
Norseal® V710

Closed-Cell polyvinyl chloride foam sealant with pressure-sensitive adhesive on one side

Features/Benefits:
  • Swirl-Free foam won't move or twist when penetrated by fasteners
  • Requires only 30% compression to seal against light, dust and water
  • Conforms to curved or irregular surfaces
  • Material is dimensionally stable
  • Easy to Die cut
Typical Applications Include:
  • Modular walls
  • Corrugated panel and lap joint seals
  • Cab roofline seals
  • Die cut gaskets
  • vehicle overlap seals
  • Metal farm buildings
  • Outdoor lighting fixtures
  • Railroad car/marine uses
The special foam substrate of Norseal V710 gives it "swirl-free" properties, allowing it to resist tearing and distortion from drilling, riveting and other fastening operations.


 Specifications  Norseal® V710 - Note  Norseal® V710 - Additional Info  

Color

Gray

Width

1/4 to 56 Inch

I.D. Core

3 Inch

Thickness

1/16 Inch

Length

200 ft.

Density (ASTM Method D1667)

12 lbs/cu. ft.

Density (ASTM Method D1667)

192 kg/m³

Hardness Shore 00 (ASTM Method D-2240)

32

Force to Compress (ASTM Method D-1667)

4.7 psi

Force to Compress (ASTM Method D-1667)

32 kPa

Compression Deflection (ASTM Method D-1667)

1.9 psi

Compression Deflection (ASTM Method D-1667)

13 kPa

Compression Set, % Lost from Orig. ht. (NTP-37)

9

Water Absorption % by Volume (NTP-35)

5

90° Peel Adhesion, 15 min. dwell (PSTC-2)

37 oz./inch

90° Peel Adhesion, 15 min. dwell (PSTC-2)

405 N/m

Elongation (ASTM Method D-412 Die A)

80 %

Tensile Strength (ASTM Method D-412 Die A)

35 psi

Tensile Strength (ASTM Method D-412 Die A)

241 kPa

Thermal Conductivity (ASTM Method C-518)

.30 BTU (inch)/sq.ft./(hr.)/°F

Recommended Service Temp.

-15 to 160 °F

Recommended Service Temp.

-26 to 71 °C

Recommended Application Temp.

40 to 125 °F

Recommended Application Temp.

4 to 52 °C

Norseal® V710 - Note

Varies with Gauge.
Based on 30% compression.
NTP is Norton Test Procedure.
Parameter values are not guaranteed and will differ from lot to lot.

Norseal® V710 - Additional Info

Swirl-Free Foam Won't Twist
Norseal® V710 is a medium-density foam that won't distort or twist when mechanical fasteners are inserted. The special foam substrate of Norseal gives it these "swirl-free" properties, allowing it to resist tearing and distortion from drilling, riveting and other fastening operations. Unlike Norseal V710, non-swirl-free foam can actually tear when penetrated by fasteners such as screws and rivets.

Exceptional Compression Characteristics
Norseal V710's exceptional compression characteristics make it highly effective for sealing overlap joints. It requires only 30% compression to seal against light, dust and water. In addition, Norseal is dimensionally stable. The material will not ooze, drip or slip while under compression. The foam also conforms easily to curved or irregular surfaces, and is easy to die cut.

Pressure-Sensitive Adhesive Eases Installation
Norseal V710's pressure-sensitive adhesive holds sealant in place for speedy installations. An easy-release paper liner eliminates stretching during installation and makes material handling quick and simple.

Range of Options Available
Norseal V710 delivers weather-resistant, long- life sealing performance. It is available in gray in widths ranging from 1/4 inch to 56 inch and lengths from 25 feet to 200 feet.

Storage
Material should be stored at 70° F (21° C), 50% relative humidity.

Application Guide
Surfaces should be clean before applying. Do not remove liner until sealant is in proper position. This prevents stretching of sealant during application. Avoid touching adhesive surface before application. Norton recommends testing all sealants under individual application conditions and materials used prior to commercial use.

Note
Because Norton cannot anticipate or control every potential application, we strongly recommend testing of this product under individual application conditions prior to commercial use. The product contains plasticizer, which may adversely affect some plastics.

Request Information

ContactTelephone: 770-422-1660 Toll Free: 1-800-511-TAPEFax: 770-425-3188

Internet Specials
Industrial Tape & Supply offers amazing prices on select products.

 

 
Copyright© 2008 Industrial Tape & Supply Company

Industrial Tape & Supply Co., 1061 King Industrial Drive, Marietta, Georgia 30062
Telehone: 770-422-1660 Toll Free: 1-800-511-TAPEFacsimile: 770-425-3188

Industrial Tape & Supply CompanyOnline CatalogRequest QuoteSearchSite Map About UsContact Us